AVEKON COMPACT PRE-TREATMENT

AVEKON Compact Pre-Treatment System is a compact system including screening and precipitation sections. In the first stage, the solid materials are held by screen and removed from the wastewater. In the second stage, the wastewater is taken into precipitation section where the collapsible / floating materials are removed from the wastewater. To ensure high removal efficiency of oil and organic content, fine air bubbles are diffused into wastewater.

The materials collected on the surface and settled in the bottom are taken with scrapers and auger spirals and then sent to a waste container automatically. Since the wastes kept in the system and cleaned continuously, the removal efficiency is high. Moreover, the space requirement is low due to compact design. Since the shaftless auger structure prevents jams and blockages, the collected waste is easily transported and disposed of. Additional sludge dewatering systems may be added if necessary. AVEKON Compact Pre-Treatment System is available to treat wastewater of various capacities.

System Features:

• Easy installation
• Compact structure, constricted area needed.
• Separation and classification of wastes
• Simultaneous TSS, Oil Grease and COD removal
• Low energy consumption
• High removal efficiency

Parts List

1. Inlet
2. Screw screen
3. Grit trap with screw conveyor
4. Partition wall
5. Aeration (if needed)
6. Grit Screw
7. Grease scraper with scraper blade (if needed)
8. Drive unit grease scraper
9. Grease pump
10. Outlet
11. Solids container
12. Sand container
13. Air blower (if needed)
14. Level gauge
15. Grease level gauge
16. Air flowmeter (if needed)

Application Field:

• Domestic Wastewater Treatment Facilities
• Wastewater Treatment Facilities of Municipalities and Organized Industrial Zones
• Hotels and Resorts
• Various Factories: Paper, Pharmaceutical, Textile, Denim Washing, Soft Drinks, Metal Coating, Plastic Recycling Facilities, Food, Milk and Dairy Products, Canned Food, Chemical Paint Production etc.